SFP 1000T Copper
1Gbps, 10/100/1000BASE-T Copper SFP Transceiver
OVERVIEW
Lantech 1Gbps Small Form Factor Pluggable (SFP) transceiver module is specifically designed for the high performance integrated full duplex data link at 1Gbps over four pair Category 5 UTP. The transceiver module is compliant with the SFP MultiSource Agreement (MSA) and IEEE802.3:2002. With the hot pluggability, the module offers a flexible and easy way to be installed into SFP MSA compliant ports at any time without the interruption of the host equipments operating online.
The 10/100/1000BASE-T electrical SFP transceivers use an integrated RJ-45 connector with transformer and PHY IC. The link length is up to 100m over four pair Category 5 UTP cabling
FEATURES
- Small Form Factor Pluggable (SFP) MSA Compliant
- Compatible with IEEE 802.3:2002
- 10/100/1000BASE-T operation in host system with SGMII interface
- Link length up to 100m at 1Gbps with four pair Category 5 UTP cabling
- Auto-detect MDI/MDI-X
- Internal PHY IC is configurable by host system via I2C interface
- Single 3.3V power supply operation and low power dissipation
SPECIFICATIONS
Absolute Maximum Ratings
Parameter
|Symbol
|Min.
|Max.
|Unit
|Note
| | --- | --- | --- | --- | --- | --- | |Storage Temperature
|Ts
|-40
|+85
|°C
|1
| |Supply Voltage
|Vcc
|-0.5
|3.6
|V
|| |
Storage Relative Humidity
|RH
|5
|95
|%
||
Notes: 1. Ambient Temperature
Recommended Operating Conditions
Parameter
|Symbol
|Min.
|Typ.
|Max.
|Unit
|Note
| | --- | --- | --- | --- | --- | --- | --- | |Case Operating Temperature
|Tc
|-10 / -40
||
70 / 85
|°C
|1
| |Supply Voltage
|Vcc
|3.15
|3.3
|3.45
|V
|| |
Supply Current
|ITX + IRX
||
300
|350
|mA
||
Notes: 1. Case Temperature, Standard Operating Temperature / Wide Operating Temperature (-E model)
General Specifications
Parameter
|Symbol
|Min.
|Typ.
|Max.
|Unit
|Note
| | --- | --- | --- | --- | --- | --- | --- | |Data Rate
|DR
|10
||
1000
|Mb/sec
|1
| |Bit Error Rate
|BER
||
|
10-10
||
2
|High-Speed Electrical Interface, Host to SFP
Parameter
|Symbol
|Min.
|Typ.
|Max.
|Unit
|Note
| | --- | --- | --- | --- | --- | --- | --- | |TD+, TD- Input Voltage Swing
|Vin+
Vin-
250
||
1200
|mV
|2
| |RD+, RD- Output Voltage Swing
|Vout+
Vout-
250
||
800
|mV
|2
| |Rise Time (Receiver)
|tr
||
180
|250
|ps
|1
| |Fall Time (Receiver)
|tf
||
180
|250
|ps
|1
| |Tx Input Impedance
|Zin
||
50
||
Ohm
|2
| |Rx Output Impedance
|Zout
||
50
||
Ohm
|2
|Notes: 1. 20% to 80% value 2. Single ended
High-Speed Electrical Interface, Cable to SFP
Parameter
|Symbol
|Min.
|Typ.
|Max.
|Unit
|Note
| | --- | --- | --- | --- | --- | --- | --- | |Transmission Frequency
|ft
||
125
||
MHz
|1
| |Tx Output Impedance
|Zout.Tx
||
100
||
Ohm
|2
| |Rx Output Impedance
|Zin.Rx
||
100
||
Ohm
|2
|Notes: 1. 4D-PAM-5 encoding per IEEE802.3: 2002 2. Differential for frequencies ranging from 1MHz to 125MHz
MTBF
60% Confidence Level, 25°C
| |90% Confidence Level, 25°C
| | | --- | --- | --- | --- | |MTBF
|FIT
|MTBF
|FIT
| |1848923
|541
|739569
|1352
|