IPGS-0204DSFP
4 10/100/1000T PoE at + 2 Dual Speed SFP Industrial Unmanaged Switch
OVERVIEW
The Lantech IPGS-0204DSFP is a 4 10/100/1000T + 2 Dual Speed SFP with 4 IEEE 802.3at/af High Power PoE Industrial Switch.
The IPGS-0204DSFP is a cost-effective solution, which meets the high reliability requirements demanded by industrial applications. Besides, the equipment meets IEEE 802.3at standard, the switch can provides 30 Watts output per PoE port for Powered Devices. The switch supports wide operating temperature, range from -40°C to 75°C.
The Lantech IPGS-0204DSFP is designed to meet the demands of Industrial environments, comes packaged in a robust IP30 housing and has been tested extensively to meet Industrial EMI and EMC standards.
With voltage boost design, the IPGS-0204DSFP-12V can work from 12/24V input power source and boost the voltage to 48VDC to feed the POE power over Ethernet cable for any vehicles that usually has 12/24V power source. The slim compact design is able to fit in variety of cabinets and space.
FEATURES
- Built-in voltage boost design from 12V to 48V DC (12V model)
- Embedded 4-port PoE 802.3at inject function
- DIP switch to adjust SFP 100M or 1000M speed
- Back-plane (Switching Fabric): 12Gbps
- Supports wide operating temperature (-40°C~75°C)
- PoE 50W buget for 12V input, 90W for 24V input
- Redundant power with polarity reverse protection
- 10KB Jumbo frame supported on all ports
- IP-30 protection with DIN Rail and optional Wall Mount** design
- Relay output for power fail and alarm
- Auto-negotiation and Full duplex
**Optional
SPECIFICATIONS
Hardware Specifications
Standards
|IEEE802.3 10Base-T Ethernet
IEEE802.3u 100Base-TX
IEEE802.3ab 1000Base-T Ethernet
IEEE802.3z Gigabit fiber
IEEE802.3x Flow Control and Back Pressure
IEEE802.3at/af Power over Ethernet
Switch Architecture
|Back-plane (Switching Fabric): 12Gbps
| |Transfer Rate
|14,880pps for Ethernet port
148,800pps for Fast Ethernet port
1,488,000pps for Gigabit Ethernet / Gigabit Fiber port
Packet Buffer
|1Mbits
| |Mac Address
|8K MAC address table
| |Jumbo frame
|10KB on all ports
| |Connector
|10/100/1000T: 4 x RJ-45 with Auto MDI/MDI-X function
Mini-GBIC: 2 x 100/1000 Dual Speed SFP Sockets
DIP Switch
|SFP Speed 1000M or 100M
| |Optical Cable
|Depends on Transceiver
| |Protocol
|CSMA/CD
| |PoE pin assignment
|RJ-45 port # 1~# 4 support IEEE 802.3at End-point, Alternative A mode. Per port provides 30W at 55V ability.
Positive (VCC+): RJ-45 pin 1,2.
Negative (VCC-): RJ-45 pin 3,6.
LED
|Per unit: Power 1 (Green), Power 2 (Green), P-Fail (Amber)
TX/RJ-45 port: LNK Green, SPD 10/100 OFF, 1000 Green
SFP port : LNK Green, Active flashLink/Activity (Green), PoE (Green)
Power Supply
|DC 9.5V~56V(12V model); Redundant power
DC45 to 56V; redundant power (48V model)
PoE budget
|90W@48/24VDC (50-56VDC input is recommended for 802.3at 30W applications)
50W@12VDC
Higher PoE budget can be applied upon request. **
Power Consumption
|Switch:6W
| |Operating Humidity
|5% to 95% (Non-condensing)
| |Operating Temperature
|-40°C ~ 75°C
| |Storage Temperature
|-40°C ~ 85°C
| |Case Dimension
|Metal case IP-30,
43mm (W) x 152mm (H) x 105mm (D) (12V model)
35mm (W) x 152mm (H) x 105mm (D) (48V model)
Installation
|DIN rail or optional Wall mounting** design
| |EMI
|FCC Class A, CE EN61000-4-2 (ESD), CE EN61000-4-3 (RS), CE EN-61000-4-4 (EFT),
CE EN61000-4-5 (Surge), CE EN61000-4-6 (CS), CE EN61000-4-8, CE EN61000-6-2, CE EN55032 Class A, CE EN55024
Safety
|EN 60950-1
| |MTBF
|12V model: 1,291,990 hrs
48V model: 1,414,427 hrs
**Optional
