I(P)MR-3204DF
Industrial Multifunction VPN Router Managed Ethernet switch w/up to 2 LTE 4G + 2 serial ports + 4 Gigabit Ethernet (incl. 4 PoE) + 2 dual speed SFP w/ Load Balancing, VPN, Storage**; 24V input
OVERVIEW
Lantech I(P)MR-3204DF series is a next generation industrial multi-function VPN router w/up to 2x LTE modem + 4x Gigabit Ethernet ports incl. 4 PoE ports (PoE model) + 2 dual speed SFP+ 2 serial ports that supports advanced function of VPN, Load-balancing, EMMC Flash Storage**, Protocol gateway(Modbus), and LTE quad SIM fail-over for industrial applications. The dual core CPU with 1.6GHz + 256M flash enables the router to multi-task smoothly.
Dual concurrent LTE design 4G/3G for load-balancing
With dual LTE module design (2L model), 4 SIM card slots, I(P)MR-3204DF can allow auto-swap, failover & failback between multiple service providers for real non-stop connection. With concurrent LTE modules, it can also allocate bandwidth by Load Balancing with 8 schemes between multiple WANs. With one mobile LTE module (1L model), 2 SIM card slots, I(P)MR-3204DF provides redundant link between two service providers. Both GPS and Russian GLONASS systems are supported.
Optional EMMC Flash storage**
The optional EMMC flash storage on the router can offer 8G/16G/32G capacity.
Optional eSIM**
By replacing physical SIM, optional eSIM chip will allow users to purchase data plans at low prices from local carriers in the world.
Load Balancing with 5 mechanisms for multi-WANs
I(P)MR-3204DF supports Load Balancing for LTE/WAN connections. There are five schemes for Load Balancing function:
Pack
|Algorithm
|Description
| | --- | --- | --- | |Basic
|Fixed
|All traffic will be distributed to a single WAN.
| | |Failover
|Routes connections through preferred WAN link while others stand-by. Sequentially activating another link if the preferred link fails.
| | |Priority
|Select the active WAN according to priority.
| | |Weighted Round-Robin
|Evenly distribute the traffic over all working WAN links in circular order according to the specified weights.
| | |Custom Route
|Routing through the selected WAN for each specific traffic, ex: TCP/UDP port number and IP address.
|2 port serial connection
It builds in 2 port serial connection for RS232, RS422, RS485.
Managed switch Function
W/ port managed functions, QOS, VLAN, Multicast, Redundant protection, security
VPN and firewall
Besides traditional VPN peer to peer tunneling, I(P)MR-3204DF support latest Multi-Site VPN function that is an efficient way for mesh tunneling. The registration is under cloud service and encrypted by SSH makes the connection easy and safe. It supports Multi-Site VPN, OpenVPN, L2TP over IPsec, IPsec, L2 over GRE , IPGRE, and NAT for various VPN applications. The built-in Layer-4 firewall includes DDoS, IP address filter / Mac address filter / TCP/UDP port number.
Support Routing Protocol: Static route / RIPv2 / OSPF / BGP / EIGRP
Lantech router series supports two routing methods: static routing and dynamic routing. Dynamic routing makes use of RIPv2, OSPF, EIGRP and BGP. The user can either choose one routing method to establish the routing table.
DIDO for alarm & email notice; Event log; Remote Web control
2 sets of DIDO function can support additional high/low physical contact for designate applications besides Port / Power events, for example, DIDO function can trigger alarm if the router was moved or stolen. In case of events, the I(P)MR-3204DF will immediately send email and trap. When the router is at remote area with limited access, Web control can help to get router status or remotely reboot by Web.
Wide range input voltage from 9V-56VDC (24V Model); PoE model built-in 4 port PoE at/af with 80W budget
The I(P)MR-3204DF is able to work from 9VDC to 56VDC (24V Model) and PoE model built-in PoE at/af with PoE budget 80W that is particular good for vehicle, rail train, depot etc. application.
Environmental monitoring for inside router info& alerting; Graphic LTE signal strength
The built-in environmental monitoring can detect router ambient temperature, voltage, current where can send the syslog and email when abnormal.
Built-in Managed Switch Function
Managed switch function is built-in and provides various L2+ functions for network access deployment. It delivers ports and PoE management, VLAN, QoS, multicast, redundant ring, and security functions.
Dual image firmware
It supports dual-image firmware to choose which one to start.
Ruggedized industrial design and FCC, CE & E-marking** certificate
The I(P)MR-3204DF is designed to meet with industrial network environment with IP 30 housing. It passed serious tests under extensive Industrial EMI and environmental vibration and shocks standards.With CE & FCC radio certification for LTE and E-marking certificate, the I(P)MR-3204DF is best for outdoor community, vehicle, process control automation etc application. For more usage flexibilities, I(P)MR-3204DF supports wide operating temperature from -40°C to 65°C.
*Future Release
**Optional
FEATURES
- Built-in 4 Gigabit Ethernet ports
- Managed Ethernet switch Function
- 6 SMA type connectors for LTE & GPS
- HTTP/HTTPS/Telnet/SSH & Administration access
- Support IPv6 & IPv4 protocol
- Support Routing Protocol: Static route / RIPv2 / OSPF / BGP / EIGRP
- EMMC-FLASH storage**8/16/32G
- eSIM** to allow data-plan globally
- Radius Authentication, EAP-TLS, EAP-TTLS, PEAP; SSID broadcast disable supported
- Support Multi-Site VPN for mesh tunneling as well as Open VPN, L2TP over IPsec, IPsec, L2 over GRE , IPGRE and NAT for secured network connection
- The built-in Layer-4 firewall includes DDoS, IP address filter / Mac address filter / TCP/UDP port number.
- Support SNMP v1/v2c/v3
- NAT/ DMZ/ Port Forwarding
- Dual concurrent LTE 4G/3G design (2L model)for auto-swap/failover/failback between multiple ISPs for continuous service (four SIM card slots)
- One LTE 4G/3G w/ 2 SIM card design(1L model) for mobile redundancy
- GPS/ GLONASS (support by LTE module) connection
- Fast roaming** (Optional ) between APs by Wireless Controller
- Load Balancing supports 5 mechanisms between multiple WANs
Pack
|Algorithm
|Description
| | --- | --- | --- | |Basic
|Fixed
|All traffic will be distributed to a single WAN.
| | |Failover
|Routes connections through preferred WAN link while others stand-by. Sequentially activating another link if the preferred link fails.
| | |Priority
|Select the active WAN according to priority.
| | |Weighted Round-Robin
|Evenly distribute the traffic over all working WAN links in circular order according to the specified weights.
| | |Custom Route
|Routing through the selected WAN for each specific traffic, ex: TCP/UDP port number and IP address.
|- Built-in 2 x serial ports(RS232/RS422/RS485)
- Supports 2DI / 2DO (Digital Input / Output)
- Event alerting by Syslog, SNMP Trap, Email, Relay ; Permanent local log rotation / Maxi 1K records
- Remote Web control to get status or re-boot by Web
- Graphic LTE signal strength
- Support SNTP to synchronize system clock
- Support LLDP discovery protocol
- Support DHCP Server and Client
- Built-in environmental monitoring for system input voltage, current and ambient temperature; Able to set alert when abnormal
- Dual image firmware to choose which to start
- Firmware upgradeable through TFTP/HTTP
- Configuration backup and restoration
- Supports text configuration file for system quick installation
- USB port to upload/download configuration by USB dongle
- Reset button for factory default mode
- IP 30 housing for industrial environment
- DIN-Rail and Wall-mount** installation
- Operation temperature -40°C to 65°C
*Future Release
**Optional
SPECIFICATIONS
Cellular Interface
Location Solutions
|GPS, Glonass
| |Band Options
|Europe & North America (EUNA model)
LTE = B1, B2※, B3, B4※, B5※, B7, B8, B12※, B13※, B20, B25※, B26※, B29※, B30※, B41※ (TDD)
DC-HSPA+/ HSPA+/ HSPA/ UMTS = B1, B2※, B3, B4※, B5※, B8
Data Rates – LTE
|Europe & North America (EUNA model)
Downlink (Cat 6):
FDD: 300 Mbps
TDD: 222 Mbps
Uplink (Cat 6):
FDD: 50 Mbps
TDD: 26 Mbps
Physical Ports & System
Connectors
|10/100/1000T: 4x ports RJ 45
Dual Speed SFP port x 2ports
USB x 1
RS-232 connector: 1 x RJ 45
Serial connector : 2 DB9
SIM card slots : 4(2L) or 2(1L)
2L model
SMA connector for LTE: 4 (female)
SMA connector for GPS: 2 (female)
1L model
SMA connector for LTE: 2 (female)
SMA connector for GPS: 1 (female)
Power & P-Fail connector: 1 x 6-pole terminal block
DIDO : 1 x 5-pole terminal block
Serial Baud Rate
|1000Kbps for RS232 ; 12Mbps for RS422/RS485
| |Serial Data Bits
|5, 6, 7, 8
| |Serial Parity
|odd, even, none, mark, space
| |Serial Stop Bits
|1, 1.5, 2
| |RS-232
|TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
| |RS-422
|Tx+,Tx-, Rx+, Rx-,GND
| |RS-485 (2-wire)
|Data+, Data-,GND
| |Isolation protection
|Input power to I/O: 1.5KV isolation
Input power to Ethernet 1.5KV isolation
Input power to PoE port 1.5KV isolation (PoE model)
EMMC**
|8G 16G 32G
| |DI/DO
|2 Digital Input (DI) :
Level 0: -30~2V / Level 1: 10~30V
Max. input current:8mA
2 Digital Output(DO): Open collector to 40 VDC, 200mA
LED Indicators
Power & System indicator
|Per unit: Power 1 (Green), Power 2 (Green), P-Fail (Red) , Ring Master(Green), Storage(Green), Serial1/Serial2(Green) ,Ready(Green)
| |10/100/1000Base-T(X) port indicator
|Link/Activity (Green), Speed (1000T: Yellow; 10/100TX: off), PoE (Green, PoE model)
| |SIM
|Green for Link/Act
| |GPS
|Green for Link/Act
| |Fault
|Red: Ethernet link down or power down
|Fault Contact
Relay
|Relay output to carry capacity of 1A at 24VDC
|Power
Input power
|Single DC input, 9~56VDC
| |PoE Budget (PoE model)
|80W
| |Power consumption (Typ.)
|30.5 Watts
|Physical Characteristic
Enclosure
|IP 30 Metal case
| |Dimension
|74 (W) x 142 (D) x 152 (H) mm
| |Weight
|900g
|Environmental
Storage Temperature
|-40°C ~ 85°C (-40°F ~ 185°F)
| |Operating Temperature
|-40°C ~ 65°C (-40°F ~ 149°F)
| |Operating Humidity
|5% to 95% Non-condensing
|Regulatory Approvals
Safety
|EN 62368
| |EMC
|FCC Part 15B Class A,
EN 55032: 2015,
EN 55024: 2010
IEC 61000-6-2,
IEC 61000-6-4
EMS
|IEC 61000-4-2 (ESD),
IEC 61000-4-3 (RS),
IEC 61000-4-4 (EFT),
IEC 61000-4-5 (Surge),
IEC 61000-4-6 (CS),
IEC 61000-4-8 (PFMF)
Radio Frequency
|EN 301 489-1,
EN 301 489-17,
EN 301 489-19,
EN 301 489-52
EN 301 908-1※,
EN 303 413,
EN 62311
Vehicle certificate
|E13**
| |MTBF
|NA
|Software
IPv6/4
|Present
| |VPN
|Multi-site VPN, Open VPN, L2TP, IPSec , L2 over GRE
| |Login Security
|Supports IEEE802.1x Authentication/RADIUS
| |Access Security
|HTTP/HTTPS/Telnet/SSH & Administration; SNMP v1/v2/v3 access for authentication via MD5/SHA(v3) and Encryption via DES/AES(v3)
| |Routing
|Static route / RIPv2 / OSPF / BGP / EIGRP
| |Protocol
|PPPoE Client,DHCP server/client, Adjustable MTU, Port forwarding (NAPT), DMZ; NAT, SNTP, Firewall(Firewall(DDoS; IP address filter / Mac address filter / TCP/UDP port name ),VRRP, DDNS
| |Management
|SNMP v1,v2c,v3/ Web/Telnet/CLI
| |Managed function
|QOS, VLAN, Multicast, Redundant protection, security
| |Environmental Monitoring
|System status for input voltage, current , ambient temperature to be shown in GUI and sent alerting if any abnormal status
| |Graphic signal display
|Graphic LTE signal strength
| |Timer
|Built-in Real Time Clock to keep track of time always(RTC)
| |Discovery
|IEEE 802.1ab Link Layer Discovery Protocol (LLDP)
| |SNMP trap
|Device cold / warm start
Port link up / link down
DI/DO high / low
Remote Web control
|To reboot router by WebUI
| |Maintenance
|Firmware upgradeable through TFTP/HTTP
| |Configuration backup & restore
|Supports text configuration file for system quick installation
USB port to upload/download configuration by USB dongle
Software - Load Balancing
5 schemes for multiple WAN(client mode)
|Pack
|Algorithm
|Description
| | --- | --- | --- | |Basic
|
Fixed
|All traffic will be distributed to a single WAN.
| | |Failover
|Routes connections through preferred WAN link while others stand-by. Sequentially activate another link if preferred link failure occurs.
| | |Priority
|Routes connections through preferred WAN link while others stand-by. Sequentially activate other links if overflow occurs.
| | |Weighted Round-Robin
|Evenly distribute the traffic over all working WAN links in circular order according to the specified weights
| | |Custom Route
|Routing through the selected WAN for each specific traffic ex: TCP/UDP port number and IP address.
|*Future Release
**Optional
※Standard test of the following bands are not listed in EN 301 908-1 report:
(EUNA not listed bands) LTE = B2, B4, B5, B12, B13, B25, B26, B29, B30, B41
WCDMA = B2, B4, B5;
ORDERING INFORMATION
EMMC Flash Storage
OPTIONAL ACCESSORIES - Management System
OPTIONAL ACCESSORIES - Cellular Antenna
| 2G/3G/4G dipole antenna, 791-960/1710~2170/2500~2700MHz, 3dBi, SMA plug, EU |
| ANT11000042
| 2G/3G/4G dipole antenna, 704-960/1710~2170MHz, 3dBi, SMA plug, US |
| ANT11000046
| LTE hinge rotatable antenna, 698-960MHz, 1710-2690MHz, Diameter 10mm, Length 108mm, SMA Connector |
OPTIONAL ACCESSORIES - GPS Antenna
| SMA GPS antenna, 28dB, 300m |
OPTIONAL ACCESSORIES - Antenna Base
| Magnetic antenna base for 3G/4G, RP SMA Jack Base, Length : 1M |