I(P)GS-3008
8 10/100/1000T L2+ (8 PoE at/af) Industrial Managed Ethernet Switch w/ Enhanced G.8032 Ring
OVERVIEW
Lantech I(P)GS-3008 is a high performance L2+ all Gigabit switch with 8 10/100/1000T (w/8 PoE 802.3af/at) which provides L2 wire speed and advanced security function for network aggregation deployment. It delivers ITU G.8032 enhanced ring recovery less than 20ms for single ring, comprehensive QoS, VLAN, GVRP, advanced security SSH v2/SSL, INGRESS ACL L2/L3, IGMPv1/v2/v3/router port, DHCP server/relay, jumbo frame which are important features required in mid and large network. It also supports Cisco Discovery Protocol (CDP) and LLDP for Ciscoworks to detect the switch info and to be shown on L2 map topology.
Miss-wiring avoidance, Node failure protection, Loop protection
The I(P)GS-3008 also embedded several features for stronger and reliable network protection in an easy and intuitive way. When the pre-set ring configuration failed or looped by miss-wiring, Lantech I(P)GS-3008 being able to alert with the LED indicator and disable ring automatically. Node failure protection ensures the switches in a ring to survive after power breakout is back. The status can be shown in NMS when each switch is back. Loop protection is also available to prevent the generation of broadcast storm when a dumb switch is inserted in a closed loop connection.
User friendly GUI, Auto topology drawing
The user-friendly UI, innovative auto topology drawing and topology demo makes I(P)GS-3008 much easier to get hands-on. The complete CLI enables professional engineer to configure setting by command line.
Enhanced G.8032 ring, 8 MSTI MSTP
Lantech I(P)GS-3008 features enhanced G.8032 ring which can be self-healed in less than 20ms for single ring topology protection covering multicast packets. It also supports various ring topologies that covers enhanced ring and basic ring by easy setup than others. It supports MSTP that allows each spanning tree for each VLAN for redundant links with 8 MSTI.
DHCP option 82 & Port based, Mac based DHCP, Option66, DHCP Snooping
DHCP server can assign dedicated IP address by MAC or by port (Port based for single switch), it also can assign IP address by port for multiple switches with single DHCP option82 server. DHCP Snooping is supported. DHCP Option66 server can offer IP address of TFTP server to DHCP client for VOIP application.
GVRP supported
It supports the GVRP for large VLAN segmentation.
IGMPv3, GMRP, router port, static multicast forwarding and multicast Ring protection
The unique multicast protection under enhanced G.8032 ring can offer immediate self-recovery instead of waiting for IGMP table timeout. It also supports IGMPv3, GMRP, router port and static multicast forwarding binding by ports for video surveillance application.
Editable configuration text file; Factory reset button; CPU watchdog
The configuration file of Lantech I(P)GS-3008 can be exported in text file so that it can be edited and configured back to switch with ease for mass deployment. Factory reset button can restore the setting back to factory default and built-in watchdog design can automatically reboot the switch when CPU is found dead.
Event log; Relay alarm
In case of event, the I(P)GS-3008 being able to send SNMP Traps out immediately. Featured with relay contact alarm function, the I(P)GS-3008 being able to connect with alarm system in case of power failure and port disconnection. In case of such event, it will send out trap alerting to predefined users.
Dual power input design (12V or 24V or 48V input)
Lantech IPGS-3008-12V is designed with dual input power at 9.5V~56VDC while IGS-3008-12V is at 9V~60VDC. I(P)GS-3008-24V model allows with 9~36VDC input and 48V model with 44V~56VDC for PoE model. The PoE budget for 12V input is 60W and for 24V input is 120W, for 48V input is 240W. (For PoE Model)
Industrial hardened design for extended temperature operation
Lantech I(P)GS-3008 provides EFT/SURGE Ethernet ESD protection, which can reduce unstable situation caused by power line and Ethernet. It has high reliability and robustness coping with extensive EMI/RFI phenomenon, environmental vibration and shocks usually found in factory, substation, steel automation, aviation, mining and process control. It is the best solution for Automation, transportation, surveillance, Wireless backhaul, Semi-conductor factory and assembly lines.
E-marking certificate
The E-marking certificate makes it the most suitable PoE switch for bus, carriage, other vehicles application as well as for industrial areas where the power source is limited with 24V but has demand of IP surveillance or VoIP applications. Only 24VDC input system is applicable for E-mark approval.
Environmental monitoring for switch inside information
The environmental monitoring can detect switch overall temperature, voltage and current where can send the SNMP traps when abnormal.The -E model can be used in extreme environments with an operating temperature range of -40°C to 75°C.
Editable configuration file
The configuration file of Lantech I(P)GS-3008 can be exported and edited with word processor for other switches configuration with ease.The built-in watchdog design can automatically reboot the switch when CPU is found dead.
*Future Release
**Optional
FEATURES
- 8 10/100/1000T (w/8 PoE 802.3af/at) ports Managed Ethernet Switch (Total 8 Ports Switch)
- Dual 9.5V~56VDC power input for 12V model with PoE budget 60W at 12V input, 120W at 24V input, 240W at 48V input (For PoE Model)
- Dual 9V~60VDC power input for 12V model and dual 9V~36VDC power input for 24V model without PoE
- PoE management including PoE detection and scheduling for PD (power devices) (For PoE Model)
- Back-plane (Switching Fabric): 16Gbps
- 16K MAC address table
- 10KB Jumbo frame supported
- User friendly UI, auto topology drawing, topology demo, complete CLI for professional setting
- Enhanced G.8032 Ring protection in 20ms (single ring)
- Support various ring/chain topologies, including enhanced ring and basic ring
- Enhanced G.8032 ring configuration with ease
- Cover multicast and data packets protection
- Supports Ethernet ESD protection
- Built-in RTC (Real Time Clock) to keep track of time
- Supports IEEE 802.1p Class of Service, per port provides 8 priority queues Port base, Tag Base and Type of Service Priority
- IEEE 802.1d STP, IEEE 802.1w RSTP,802.1s MSTP VLAN redundancy with 8 MSTI
- 4K 802.1Q VLAN, Port based VLAN, GVRP
- Supports IEEE 802.1ab LLDP, Cisco CDP; LLDP info can be viewed via Web/ Console
- DHCP server / client / DHCP Option 82 relay / DHCP Option 82 server; Port based DHCP server; DHCP Snooping; DHCP option 66
- Bandwidth Control
- Ingress packet filter
- Broadcast/multicast packet filter control
- Relay alarm output system events
- Miss-wiring avoidance
- LED indicator
- Node failure protection
- Ensure the switches in a ring to survive after power breakout is back
- The status can be shown in NMS when each switch is back
- TFTP/ HTTP firmware upgrade
- Configuration backup and restoration
- Supports editable configuration file for system quick installation
- System Event Log and SNMP Trap for alarm support; 32 RMON counters
- Security
- SSL/SSH v2/INGRESS ACL L2/L3
- Port Security: MAC address entries/Filter/static MAC-Port binding
- Remote Admin: IP address security management to prevent unauthorized intruder.
- Login Security: IEEE802.1X/RADIUS
- HTTPS for secure access to the web interface
- Static multicast forwarding forward reversed IGMP flow with multicast packets binding with ports for IP surveillance application
- Multicast static forwarding for non- IGMP camera to prevent flooding; IGMP router port to assign query in ring and for reversed multicast video flow
- IGMPv1,v2,v3 with Query mode for multimedia; GMRP
- Factory reset button to restore setting to factory default
- Optional environmental monitoring for system input voltage, current, ambient temperature
- Watchdog design to auto reboot switch CPU is found dead
- E-marking certificate for vehicle application
- Only 24VDC input system is applicable for E-mark approval
- IP30 metal housing with DIN rail and Wall-mount** design
*Future Release
**Optional
SPECIFICATIONS
Hardware Specifications
Standards
|IEEE802.3 10Base-T Ethernet
IEEE802.3u 100Base-TX
IEEE802.3ab 1000Base-T Ethernet
IEEE802.3z Gigabit fiber
IEEE802.3x Flow Control and Back Pressure
IEEE802.3ad Port trunk with LACP
IEEE802.1d Spanning Tree
IEEE802.1w Rapid Spanning Tree
IEEE802.1s Multiple Spanning Tree
IEEE802.3ad Link Aggregation Control Protocol (LACP)
IEEE802.1AB Link Layer Discovery Protocol (LLDP)
IEEE802.1X User Authentication (Radius)
IEEE802.1p Class of Service
IEEE802.1Q VLAN Tag
IEEE802.3at/af Power over Ethernet (For PoE Model)
Switch Architecture
|Back-plane (Switching Fabric): 16Gbps
| |Transfer Rate
|14,880pps for Ethernet port
148,800pps for Fast Ethernet port
1,488,000pps for Gigabit Fiber / Gigabit Ethernet port
Flash
|128M Byte
| |Mac Address
|16K MAC address table
| |Jumbo frame
|10KB
| |Connectors
|10/100/1000T: 8 x ports RJ-45 with Auto MDI/MDI-X function
Power & Relay connector: 1 x 6-pole terminal block
Network Cable
|10Base-T: 2-pair UTP/STP Cat. 3, 4, 5/ 5E/ 6 cable
EIA/TIA-568 100-ohm (100m)
100Base-TX: 2-pair UTP/STP Cat. 5/ 5E/ 6 cable
EIA/TIA-568 100-ohm (100m)
1000Base-TX: 2-pair UTP/STP Cat. 5/ 5E/ 6 cable
EIA/TIA-568 100-ohm (100m)
LED
|Per unit: Power 1 (Green), Power 2 (Green), FAULT (Red); RM(Green)
Ethernet port: Link/Activity (Green), Speed (Amber);
PoE: Link/Act (Green)
Operating Humidity
|5% ~ 95% (Non-condensing)
| |Operating Temperature
|-20°C~60°C / -4°F~140°F (Standard model)
-40°C~75°C / -40°F~167°F(-E model)
Storage Temperature
|-40°C~85°C / -40°F~185°F
| |Power Supply
|Non-PoE model:
9~60VDC (12V model)
9~36VDC (24V model)
PoE model:
9.5V~56VDC (12V model)
9~36VDC (24V model)
44~56VDC (48V PoE model)
Power Consumption
|10W
| |PoE Budget (For PoE Model)
|60W at 12V input; 120W at 24V input (12V model)
100W at 24V input (24V model)
240W at 48V input (48V model) (50-56VDC input is recommended for 802.3at 30W applications)
Higher PoE budget can be applied upon request. **
PoE pin assignment (For PoE Model)
|RJ-45 port # 1~ # 8 support IEEE 802.3at/af End-point. Per port provides up to 30W
Positive (VCC+): RJ-45 pin 1,2.
Negative (VCC-): RJ-45 pin 3,6.
Case Dimension
|PoE model, Metal case.
IP-30, 43 (W) x 105 (D) x 152 (H) mm
Non-PoE model, Metal case. IP-30,
35 (W) x 105 (D) x 152 (H) mm
Weight
|660 g
| |Installation
|DIN Rail and Wall Mount** Design
| |EMI & EMS
|FCC Part 15 Class A
IEC/EN61000-6-2
CE EN55032 Class A
CE EN55024: CE EN61000-4-2 (ESD) Level 3
CE EN61000-4-3 (RS) Level 3
CE EN61000-4-4 (EFT) Level 3
CE EN61000-4-5 ED3 (Surge) Level 3
CE EN61000-4-6 (CS) Level 3
CE EN61000-4-8 (Magnetic field) Level 3
Safety
|EN62368 (LVD)
| |Stability Testing
|IEC 60068-2-27 (Shock),
IEC 60068-2-31 (Shock),
IEC 60068-2-64 (Vibration),
IEC 60068-2-80 (Vibration)
Vehicle certificate
|E13 marking (12V/24V Model)
| |MTBF
|791,695 Hrs (Standards: IEC 62380)
|Software Specifications
Management
|SNMP v1 v2c, v3/ Web/Telnet/CLI
| |SNMP MIB
|RFC 1213 MIBII
RFC 1158 MIBII
RFC 1157 SNMP MIB,
RFC 1573 IF MIB
Partial RFC 1757 RMON,
Bridge MIB,
LLDP MIB
Private MIB
Enhanced G.8032 ring
|Support ITU G.8032 v2/2012 for Ring protection in less than 20ms for self-heal recovery (single ring enhanced mode)
Support various ring/chain topologies
Includes basic single ring and enhanced ring
Enhanced G.8032 ring configuration with ease
Cover multicast & data packets protection
PoE Management (For PoE Model)
|- PoE Detection to check if PD is hang up then restart the PD
- PoE Scheduling to On/OFF PD upon routine time table
Per Port PoE Status (For PoE Model)
|On/ Off, voltage, current, watts, temperature
| |User friendly UI
|- Auto topology drawing
- Topology demo
- Complete CLI for professional setting
Port Trunk with LACP
|LACP Port Trunk: 8 Trunk groups/Maximum 10 trunk members
| |LLDP
|Supports LLDP to allow switch to advise its identification and capability on the LAN
| |CDP
|Cisco Discovery Protocol for topology mapping
| |VLAN
|Port Based VLAN
IEEE 802.1Q Tag VLAN (256 entries)/ VLAN ID (Up to 4K, VLAN ID can be assigned from 1 to 4096.)
GVRP
IPv6/4
|Present
| |RSTP/MSTP
|Supports IEEE802.1d Spanning Tree and IEEE802.1w Rapid Spanning Tree, IEEE802.1s Multiple Spanning Tree 8 MSTI
| |Quality of Service
|The quality of service determined by port, Tag and IPv4 Type of service, IPv4 Differentiated Services Code Points - DSCP
| |Class of Service
|Support IEEE802.1p class of service, per port provides 8 priority queues
| |Remote Admin
|Supports 10 IP addresses that have permission to access the switch management and to prevent unauthorized intruder.
| |Login Security
|Supports IEEE802.1X Authentication/RADIUS
| |Port Mirror
|Support 3 mirroring types: “RX, TX and Both packet”
| |Network Security
|Support 10 IP addresses that have permission to access the switch management and to prevent unauthorized intruder.
802.1X access control for port based and MAC based authentication/static MAC-Port binding
Ingress ACL L2/L3
SSL/ SSH v2 for Management
HTTPS for secure access to the web interface
IGMP
|Support IGMP snooping v1,v2,v3; 1024 multicast groups; IGMP router port ; IGMP query; GMRP
| |Static MAC-Port bridge
|Static multicast forwarding forward reversed IGMP flow with multicast packets binding with ports for IP surveillance application
| |Bandwidth Control
|Support ingress packet filter.
Ingress filter packet type combination rules are Broadcast/Multicast/Flooded Unicast packet, Broadcast/Multicast packet, Broadcast packet only and all types of packet.
The packet filter rate can be set an accurate value through the pull-down menu for the ingress packet filter.
Flow Control
|Supports Flow Control for Full-duplex and Back Pressure for Half-duplex
| |System Log
|Supports System log record and remote system log server
| |Relay Alarm
|Provides one relay output for port breakdown, power fail and alarm.
Alarm Relay current carry ability: 1A @ DC24V
Protection
|- Miss-wiring avoidance
- Node failure protection
- Loop protection
SNMP Trap
|Up to 10 trap stations; trap types including:
- Device cold start
- Authorization failure
- Port link up/link down
- DI/DO open/close
- Topology change(ITU ring)
- Power failure
- Environmental abnormal
DHCP
|Provide DHCP Client/ DHCP Server/DHCP Option 82 (Relay & Server)/Port based DHCP; DHCP Snooping; DHCP option 66
| |Mac based DHCP Server
|Assign IP address by Mac that can include dumb switch in DHCP network
| |DNS
|Provide DNS Client feature and support Primary and Secondary DNS server.
| |SNTP
|Supports SNTP to synchronize system clock in Internet
| |Environmental Monitoring**
|System status for input voltage, current, consumption and ambient temperature to be shown in GUI and sent alerting if any abnormal status (-M models)
| |Firmware Update
|Supports TFTP firmware update, TFTP backup and restore; HTTP firmware upgrade
| |Configuration
upload and download
Supports editable configuration file for system quick installation;
Support factory reset button to restore all settings back to factory default;
USB port for upload/download configuration by USB dongle
*Future Release
**Optional
ORDERING INFORMATION
| IPGS-3008-12V | 8 10/100/1000T w/8 PoE Mode A 802.3at/af 30W L2+ Industrial Managed Ethernet Switch; dual 9.5V~56VDC input; -20°C to 60°C |
| 8350-989 | IPGS-3008-12V-E | 8 10/100/1000T w/8 PoE Mode A 802.3at/af 30W L2+ Industrial Managed Ethernet Switch; dual 9.5V~56VDC input; -40°C to 75°C |
| 8350-9884 | IPGS-3008-M-12V | 8 10/100/1000T w/8 PoE Mode A 802.3at/af 30W L2+ Industrial Managed Ethernet Switch; dual 9.5V~56VDC input; -20°C to 60°C; Environmental monitoring |
| 8350-9892 | IPGS-3008-M-12V-E | 8 10/100/1000T w/8 PoE Mode A 802.3at/af 30W L2+ Industrial Managed Ethernet Switch; dual 9.5V~56VDC input; -40°C to 75°C; Environmental monitoring |
| 8350-9862 | IPGS-3008-24V | 8 10/100/1000T w/8 PoE Mode A 802.3at/af 30W L2+ Industrial Managed Ethernet Switch; dual 9V~36VDC input, compliant with ISO7637-2; -20°C to 60°C |
| 8350-9863 | IPGS-3008-24V-E | 8 10/100/1000T w/8 PoE Mode A 802.3at/af 30W L2+ Industrial Managed Ethernet Switch; dual 9V~36VDC input, compliant with ISO7637-2; -40°C to 75°C |
| 8350-9864 | IPGS-3008-M-24V | 8 10/100/1000T w/8 PoE Mode A 802.3at/af 30W L2+ Industrial Managed Ethernet Switch; dual 9V~36VDC input, compliant with ISO7637-2; -20°C to 60°C; Environmental monitoring |
| 8350-9865 | IPGS-3008-M-24V-E | 8 10/100/1000T w/8 PoE Mode A 802.3at/af 30W L2+ Industrial Managed Ethernet Switch; dual 9V~36VDC input, compliant with ISO7637-2; -40°C to 75°C; Environmental monitoring |
| 8350-986 | IPGS-3008-48V | 8 10/100/1000T w/8 PoE Mode A 802.3at/af 30W L2+ Industrial Managed Ethernet Switch; dual 44~56VDC input; -20°C to 60°C |
| 8350-987 | IPGS-3008-48V-E | 8 10/100/1000T w/8 PoE Mode A 802.3at/af 30W L2+ Industrial Managed Ethernet Switch; dual 44~56VDC input; -40°C to 75°C |
| 8350-9861 | IPGS-3008-M-48V | 8 10/100/1000T w/8 PoE Mode A 802.3at/af 30W L2+ Industrial Managed Ethernet Switch; dual 44~56VDC input; -20°C to 60°C; Environmental monitoring |
| 8350-9871 | IPGS-3008-M-48V-E | 8 10/100/1000T w/8 PoE Mode A 802.3at/af 30W L2+ Industrial Managed Ethernet Switch; dual 44~56VDC input; -40°C to 75°C; Environmental monitoring |
| 8350-9876 | IGS-3008-12V | 8 10/100/1000T L2+ Industrial Managed Ethernet Switch, dual 9V~60VDC input; -20°C to 60°C |
| 8350-9885 | IGS-3008-24V | 8 10/100/1000T L2+ Industrial Managed Ethernet Switch, dual 9V~36VDC input, compliant with ISO7637-2; -20°C to 60°C |
| 8350-9878 | IGS-3008-12V-E | 8 10/100/1000T L2+ Industrial Managed Ethernet Switch, dual 9V~60VDC input; -40°C to 75°C |
| 8350-9879 | IGS-3008-24V-E | 8 10/100/1000T L2+ Industrial Managed Ethernet Switch, dual 9V~36VDC input, compliant with ISO7637-2; -40°C to 75°C |
| 8350-9887 | IGS-3008-12V-M | 8 10/100/1000T L2+ Industrial Managed Ethernet Switch + environmental monitoring, dual 9V~60VDC input; -20°C to 60°C |
| 8350-9888 | IGS-3008-24V-M | 8 10/100/1000T L2+ Industrial Managed Ethernet Switch + environmental monitoring, dual 9V~36VDC input, compliant with ISO7637-2; -20°C to 60°C |
| 8350-9877 | IGS-3008-12V-M-E | 8 10/100/1000T L2+ Industrial Managed Ethernet Switch + environmental monitoring, dual 9V~60VDC input; -40°C to 75°C |
| 8350-9889 | IGS-3008-24V-M-E | 8 10/100/1000T L2+ Industrial Managed Ethernet Switch + environmental monitoring, dual 9V~36VDC input, compliant with ISO7637-2; -40°C to 75°C |