I(P)ES-0016C
16 FE (PoE) at/af Industrial Ethernet Unmanaged Switch; 24V/48V input models
OVERVIEW
Lantech I(P)ES-0016C is a high-performance all 16 10/100TX industrial Ethernet switch with w/8 PoE 802.3af/at ports.
Dual 48V, 24V input with max PoE budget
The IPES-0016C supports IEEE802.3at/af standard which can feed HI-power up to 30W at each PoE port for big power consumption devices like PTZ IP camera, High power wireless AP etc.
The IPES-0016C-24V accepts power input 9~36VDC with IEEE802.3at/af standard and feeds up to 30W per PoE port with a maximum 80W@24V and 240W@48V output (at dual input).
PoE 48V model accepts 45~56VDC power input and can feed 48V output for PoE feeding in the vehicle at max 240W @48V input.
Efficient PoE timer when ignition off
Efficient PoE configuration when ignition off supports optional PoE feeding OFF timer (1/5/10mins or default by 60mins) at ignition off mode to prevent car battery drain-out. (- IGN model)
E-marking certificate, ISO 7637-2 compliant High reliability and extended working temperature
Lantech I(P)ES-0016C can reduce unstable situations caused by power line and Ethernet. It has high reliability and robustness coping with extensive EMI/RFI phenomenon, environmental vibration and shocks usually found in Automation, transportation, surveillance, Wireless backhaul, Semi-conductor factory and assembly lines.
The -E model can be used in extreme environments with an operating temperature range of -40°C to 75°C.
The E-marking certificate makes it the most suitable for bus, carriage, other vehicle applications as well as for industrial areas.
The 24V model is also compliant with ISO 7637-2 (pulse 5A) which protects switch from being damaged by high voltage that could be found at vehicle cranky start.
SPECIFICATIONS
Hardware Specifications
Standards
|IEEE802.3 10Base-T Ethernet
IEEE802.3u 100Base-TX
IEEE802.3x Flow Control and Back Pressure
IEEE802.3at/af Power over Ethernet
Switch Architecture
|Back-plane (Switching Fabric): 3.2Gbps
| |Transfer Rate
|14,880pps for Ethernet port
148,800pps for Fast Ethernet port
Mac Address
|2K MAC address table
| |Connectors
|10/100TX: 16 x ports RJ-45 with Auto MDI/MDI-X function
Power & P-Fail connector: 1 x 6-pole terminal block
Network Cable
|10Base-T: 2-pair UTP/STP Cat. 3, 4, 5/ 5E/ 6 cable
EIA/TIA-568 100-ohm (100m)
100Base-TX: 2-pair UTP/STP Cat. 5/ 5E/ 6 cable
EIA/TIA-568 100-ohm (100m)
LED
|Per unit: Power 1 (Green), Power 2 (Green);
Ethernet port: Link/Activity (Green)
PoE: Active (Green)
Operating Humidity
|5% ~ 95% (Non-condensing)
| |Operating Temperature
|-20°C~60°C / -4°F~140°F (Standard model)
-40°C~75°C / -40°F~167°F(-E model)
Storage Temperature
|-40°C~85°C / -40°F~185°F
| |Power Supply
|9~36VDC (24V model);
45~56VDC (48V model)
PoE Budget
|240W for 45~56V input (48V model)
(50-57VDC input is recommended for 802.3at 30W applications)
80W at 24V input
A higher PoE budget can be applied upon request. **
PoE pin assignment
|RJ-45 port # 1~#8 supports IEEE 802.3at/af End-point, Alternative A mode. Per port provides up to 30W
Positive (VCC+): RJ-45 pin 1,2
Negative (VCC-): RJ-45 pin 3,6
Power Consumption
|4.8W (full load without PoE)
| |Galvanic Isolation
|Between power input and case ground
Between the Ethernet port and case ground
Between power input and Ethernet port
Case Dimension
|Metal case. IP-30
66 (W) x 105 (D) x 152 (H) mm
Weight
|TBA
| |Installation
|DIN Rail and Wall Mount** Design
| |EMI & EMS
|FCC Part 15 Subpart B,
EN 55035:2017/A11:2020,
EN 55032:2015/A11:2020,
IEC 61000-4-2:2008,
IEC 61000-4-3:2020,
IEC 61000-4-4:2012,
IEC 61000-4-5:2014+AMD1:2017 CSV,
IEC 61000-4-6:2023,
IEC 61000-4-8:2009,
IEC 61000-6-2:2016,
IEC 61000-6-4:2018,
EN IEC 61000-6-2:2019,
EN IEC 61000-6-4:2019,
BS EN 55035:2017/A11:2020,
BS EN 55032:2015/A11:2020,
Safety
|EN 62368 (LVD)
| |Stability Testing
|IEC 60068-2-27 (Shock),
IEC 60068-2-31 (Shock),
IEC 60068-2-64 (Vibration),
IEC 60068-2-80 (Vibration)
Vehicle certificate
|E24 marking ( 24V model)
| |MTBF
|483,162 hrs (IEC62830 standards)
|*Future Release **Optional
ORDERING INFORMATION
Model name -IGN as default 60min., ignition models with PoE OFF timer 1min/5min/10min have different part numbers and descriptions. (IGN1/IGN5/IGN10 mins.)*For all detailed part nos. and model names, please refer to the P/N table.
| IPES-0016C-24V | 16 10/100TX w/16 PoE Mode A 802.3at/af 30W Industrial Ethernet Switch, dual 9V~36VDC input; compliant with ISO7637; -20°C to 60°C |
| 8351-149603 | IPES-0016C-24V-E | 16 10/100TX w/16 PoE Mode A 802.3at/af 30W Industrial Ethernet Switch; dual 9V~36VDC input; compliant with ISO7637; -40°C to 75°C |
| 8351-14965 | IPES-0016C-24V-IGN | 16 10/100TX w/16 PoE Mode A 802.3at/af 30W Industrial Ethernet Switch; dual 9V~36VDC input; compliant with ISO7637; -20°C to 60°C w/ignition default PoE OFF 60min. |
| 8351-149604 | IPES-0016C-24V-IGN-E | 16 10/100TX w/16 PoE Mode A 802.3at/af 30W Industrial Ethernet Switch; dual 9V~36VDC input; compliant with ISO7637; -40°C to 75°C w/ignition default PoE OFF 60min. |
| 8351-149605 | IES-0016C | 16 10/100TX Industrial Ethernet Switch, dual 12V~56VDC input; compliant with ISO7637-2; -20°C to 60°C |
| 8351-149606 | IES-0016C-E | 16 10/100TX Industrial Ethernet Switch, dual 12V~56VDC input, compliant with ISO7637-2; -40°C to 75°C |
| 8351-14976 | IES-0016C-24V | 16 10/100TX Industrial Ethernet Switch, dual 9V~36VDC input; compliant with ISO7637-2; -20°C to 60°C |
| 8351-149607 | IES-0016C-24V-E | 16 10/100TX Industrial Ethernet Switch, dual 9V~36VDC input, compliant with ISO7637-2; -40°C to 75°C |
| 8351-149608 | IES-0016C-24V-IGN | 16 10/100TX Industrial Ethernet Switch, dual 9V~36VDC input; compliant with ISO7637-2; -20°C to 60°C w/ignition |
| 8351-149609 | IES-0016C-24V-IGN-E | 16 10/100TX Industrial Ethernet Switch, dual 9V~36VDC input, compliant with ISO7637-2; -40°C to 75°Cw/ignition |